Kicker XS50 Amplifier Stable 0.5 Ohm 600W RMS Competition > Made IN USA

Description

Kicker XS50 Amplifier Stable 0.5 Ohm 600W RMS Competition > Made IN USA
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Ebay preview
KICKER
XS
50
MADE IN USA
(UNAVAILABLE) ONE OF THE BEST AMPLIFIERS IN THE WORLD
STABLE COMPETITION AMPLIFIER AT 0.5ohm 300x2W RMS
TECHNICAL FEATURES:
WATT RMS 4ohm: 25x2
WATT RMS 2ohm: 75x2
WATT RMS 1ohm: 150x2
WATT RMS 0.5ohm: 300x2
WATT RMS MONO 4ohm: 150W
WATT RMS MONO 2 OHM: 300W
WATT RMS MONO 1 OHM: 600W
MAXIUM DISTORTION AT RATED POWER, 4ohm STEREO, 12.5-16VDC: 0.02%
FREQUENCY RESPONSE: 10HZ-28kHz, +0, -1dB
SIGNAL TO NOISE RATIO: 100dB
IMPUT IMPEDANCE: 22k ohm
IMPUT SENSITIVITY: 150mV-3V RMS
Features
XS-Series Amplifier:
The XS-50 amplifier is a competition-grade amplifier, capable of handling extremely low impedances. Its high current design enables the amplifier to provide enormous amounts of power for large, multiple-speaker systems.
The amp is stable down to 1/2-ohm in stereo or 1-ohm in bridged mono. This allows you to safely connect two 2-ohm subwoofers, four 4-ohm subs, or eight 8-ohm subs in parallel to this amplifier in bridged mode.
Regulated Power Supply:
This amplifier will perform at rated power with an input voltage of 12.5 to 16 Volts. There is no loss of power due to voltage fluctuations.
Note:
Because of the regulated power supply, the amp gain control does not give the amp more power when you turn it up. It should be used to match the output level of the source unit.
High Input Impedance:
This amp has an RCA input impedance rating of 22,000 ohms. This high input impedance allows you to "daisy-chain" up to ten amplifiers without signal degradation commonly caused by splitters.
RCA Outputs:
A set of gold-plated stereo RCA outputs can be used to pass full-range signals from this amplifier to another amplifier. The RCA output signal is not affected by the setting of the Kicker Active Signal Processing Module being used with the amplifier.
Inputs / Outputs / Controls
Right Side of Amp:
Speaker Outputs:
Two pairs of gold-plated set screw terminals that accepts up to 8 gauge wire (2.5mm Allen wrench supplied)
Module Docking Port:
Port for supplied ZRX (or optional) Kicker Active Signal Processing modules
Amp Gain:
Variable gain control for matching output level of source
RCA Input:
Gold-plated RCA line input jacks
RCA Output:
Gold-plated RCA line output jacks
NEW AMPLIFIER IN ITS ORIGINAL PACKAGING, NEVER OPENED
XS-Series Amplifier: The XS-50 amplifier is a competition-grade amplifier, capable of handling extremely low impedances. Its high current design enables the amplifier to provide enormous amounts of power for large, multiple-speaker systems. The amp is stable down to 1/2-ohm in stereo or 1-ohm in bridged mono. This allows you to safely connect two 2-ohm subwoofers, four 4-ohm subs, or eight 8-ohm subs in parallel to this amplifier in bridged mode. Regulated Power Supply: This amplifier will perform at rated power with an input voltage of 12.5 to 16 Volts. There is no loss of power due to voltage fluctuations. Note: Because of the regulated power supply, the amp gain control does not give the amp more power when you turn it up. It should be used to match the output level of the source unit.
Canali
2 canali
Impendenza
0.5 - 1 - 2 - 4 ohms
Colore
Nero
Quantità
1
Tipo
2 Canali
EAN
Non applicabile
MPN
Non applicabile
Paese di fabbricazione
Stati Uniti
Potenza RMS
600 W
Modello veicolo compatibile
1.1 Universal
Marca veicolo
univesale
Marca
Kicker
Inserzione bundle
No
Watts RMS
300 x2
Modello
XS50
Articolo modificato
No
Altro codice identificativo
XS50